JOVY Systems RE-8500, Быстрый старт

Страница: 6 / 95

Quick Start Up Guide RE-8500
6 Jovy Systems® Limited
4- Standard profile operating method
The standard profile mode behavior is controlled; according to the IPC
J-STD-20 recommendations. Heaters power level controlled as well and
operating sequences between the upper heater, middle heater and side
heaters.

Profile is only running when two thermocouples are connected,
if one thermocouple connected process will not start.
Thermocouple (TC1) should place near the targeted component
and thermocouple (TC2) placed underside the PCB below the
component.
The table below shows the temperature ranges for each
profile stage in both Leaded and Lead Free profiles.
(Table -1)
Leaded Profile Lead Free Profile
Pre-heat Temperature
Range
90◦C to 135◦C 120◦C to185◦C
Soaking Temperature
Range
140◦C to 180◦C 190◦C to 215◦C
Peak Temperature Range 195◦C to 245oC 220◦C to 270◦C
Maximum Dwell time 250 seconds 250 seconds