JOUTEC Teye ADR3311, Руководство пользователя

Страница: 15 / 34

15
Installa ti on of rear sensor
Cau ti on!
Each vehicle has its own and di ff erent structure and system.
The vehicle should be turned o ff while working and conduct with the mechanics.
Please Make sure to be connected fi rmly between T-box and the rear camera.
The rear sensor cable is a tt ached with the rear camera and this cable can be connected
with television, navigator, GPS monitor and small monitor to show the live view from rear
side. (The rear sensor cable should be connected with rear lamp power terminal)
Open the trunk(boot)
of the vehicle and open
the rear lamp like the
picture.
Pill out the (+) power
wire of rear lamp like
picture.
Take a look at the rear
lamp and check (+) power
wire and (-)
power wire
Connect rear sensor cable
to pilled (+) power wire
and wrap up by vinyl
electrical tape.
1 2
3 4
Installing the accessories
Locate the best posi ti on for the
remote alarm bu tt on. Secure
the bu tt on by removing the
adhesive fi lm a tt ached to the
tape on the external bu tt on,
press and hold.
1
Keep the remote control
at the safe place to be
reached easily. .
4
Connect the video cable to
the connec
ti on port of the
device.
3
2
Locate the best posi ti on
for Remote control IR
recep
ti on.