Jøtul PF 621 S, Инструкция по установке, эксплуатации и обслуживанию, Страница: 15 / 76

15
ENGLISH
If the “Eco mode” function is active, instead of
modulating its power, the stove will shut down after
reaching the set temperature and then reignite after
the room temperature drops below the set delta
(see section 10�3)�
The desired room temperature can be set in the
temperature menu .
9�6 DRAUGHT CONDITIONS
Work in continuous mode with minimal draught,
particularly during thawing periods (unfavourable
draught), fosters deposition of soot and tar:
• alternate periods with minimum draught with periods
of maximum draught.
10 AVAILABLE FUNCTIONS
10�1 “TIMER” FUNCTION
This function allows for programming and assigning
personalised programs to different days of the week for
the purpose of automatic firing and/or extinguishing of
the stove.
Up to six personalised programs can be set.
The time of firing and extinguishing, as well as the desired
temperature, can be set in every program.
It is possible to assign up to 3 programs to every day of
the week.
Days of the week are designated by numbers from 1 to 7:
Monday = “d1”, Tuesday = “d2”, etc., Sunday = “d7”.
10�1�1 Configuration of programs
a) Using keys , select the Configuration menu and
press .
b) Select the
”7”
item using button and confirm by pressing
button .
c) Select submenu
[2]
confirm by pressing button .
d) Using buttons , scroll through programs
P1–P6
. Using
button , select the program to be modified.
e) The ignition time parameter will start to flash. Change the
parameter using the buttons, then press button .
f) The minutes parameter will start to flash. Change the
parameter using the buttons, then press button .
g) The extinguishing time parameter will start to flash. Change
the parameter using the buttons, then press button
.
h) The minutes parameter will start to flash. Change the
parameter using the buttons, then press button .
i) The desired temperature parameter will start to flash.
Change the parameter using the buttons, then press
button .
j) Press button , to confirm the setting.
10�1�2 Assigning programs to days of the week
This function makes it possible to assign up to 3 different
programs to a given day.
a) Using keys , select the Configuration menu and
press .
b) Select the
”7”
item using button and confirm by pressing
button .
c) Select submenu
[1]
confirm by pressing button .
d) Using buttons , select the day
[d1]–[d7]
to which
programs are to be assigned.
e) Select the program using button .
f) The parameter of the first program to be assigned will start
to flash:
P1–P6
or „
OFF
” to deactivate it.
g) Change the parameter using the buttons, then press
button .
h) The parameter of the second program to be assigned will
start to flash:
P1–P6
or
“OFF”
to deactivate it.
i) Change the parameter using the buttons, then press
button .
j) The parameter of the third program to be assigned will start
to flash:
P1–P6
or
“OFF”
to deactivate it.
k) Change the parameter using the buttons, then press
button to confirm the setting.
10�1�3 Timer activation/deactivation
a) Using the arrow keys , select the Timer menu ;
b) Confirm using button .
c) Use buttons to scroll and select:
“ON”
to activate the
timer, or
“OFF”
to deactivate it.
d) Press the key to confirm the selection.
When the control clock is engaged, the icon is
displayed constantly.
10�2 ECONOMIC FUNCTION “ECO MODE”
This function shuts down the stove after the programmed
ambient temperature is reached. If this function is not
active, the stove will modulate its operation in order
to maintain the set temperature at minimum fuel
consumption. The “Eco Mode” function is only available
in configuration 1.
To activate/deactivate this function:
a) Using keys , select the Configuration menu and
press .
b) Select the
“7”
item using button and confirm by pressing
.
c) Select submenu
[7]
confirm by pressing button .
d) Set one of the following parameters using buttons :
Eco
J
Confirmation of the “Eco Mode” function
Off
J
Deactivation of the “Eco Mode” function
e) Press button , to confirm the setting.