Jotron AS| Phontech 6200: User handbook
BASIC OPERATION:
Page 6
P/N: 87477 (v.B)
5.
BASIC OPERATION:
4.1
POTS INDIVIDUAL SERVICES:
The ICS POTS interface supports most available types of analogue DTMF telephones. Because of the
multitude of services available in equipment from different manufacturers, please refer to the
attached documentation for each telephone.
Example of possible POTS services:
Loudspeaking telephones
Wireless telephones
Speed dial
Answering machine
4.2
SNOM INDIVIDUAL SERVICES
The Snom 300 telephones have a multitude of custom settings and special functions. These are
described in a separate user manual delivered with the each phone. The initial setup of the phone
and configuration of system wide special functions is performed automatically the first time it is
connected to the Phontech 6200 system.
4.3
PLACE A CALL:
Using the handset:
S
Idle
U
Unhook the handset
Dial tone
U
Dial the extension number
Call tone
……Conversation
U
Replace the handset
Some POTS has handsfree/speakerphone operation. The required sequence for engaging a
speakerphone call must be specified by the POTS manufacturer. When handsfree/speakerphone
operation is described in this document, it refers to 61xx intercom units.
In general, when this document says to “Unhook the handset” you can alternatively use the
speakerphone mode by pushing the ACT key.
Speakerphone: 61xx
S
Idle
U
Push the
ACT
key
Dial tone (loudspeaker)
ACT
led on
U
Dial the extension number
Call tone
…….Conversation (handsfree)
