7
www.jotoimagingsupplies.com 1-800-565-5686 Blaine, WA | Las Vegas, NV | Antioch TN | Coquitlam, BC | Brampton, ON
Setting Up Your Mug Press
Turning On Your Mug Press
Turn the Main Power Switch on. The
Main Power Switch is at the right side
of the heat press.
Current temperature, set temperature,
current time, set time will display.
How to Read The Display
1.) Left side PV value = Current Temperature
2.) Right side PV value = Current Time
3.) Left side SV value = Set Press Temperature
4.) Right side SV value = Set Press Time
Setting Press Temperature
Press OK to start. Use the up and down
arrows to choose to display in °F or °C.
°F stands for Fahrenheit
°C stands for Celsius
Once selection is made, press OK to save
Now use the arrow to change the value of the set
temperature. The left light in the middle is lit to
indicate you are in the set temperature mode.
Setting Press Time
Green Set Time Value will flash
Use the up and down arrows to change
the value.
Press OK to save the value.
Wait until the current temperature is the same as the
set temperature before using. The press will beep
once set temperature is reached. Close and open
the press to stop the beeping
Note: This mug press should not be set to exceed 400˚F (200˚C). Setting the press temperature to
above 400˚F (200˚C) will burn out your mug element and may cause a fire hazard.
