Joto E-HP-JLF-XSTM-40 Скачать руководство пользователя страница 2

2

www.jotoimagingsupplies.com 1-800-565-5686 Blaine, WA | Las Vegas, NV | Antioch TN | Coquitlam, BC | Brampton, ON

Safety Instructions

For Use By Qualified Personnel Only 

When using your Heat Press,

basic precautions should always be followed,

including the following:

Read all instructions.

Use heat press only for its intended use.

Always keep the heat press dry.  Do not get the heat press wet to reduce the risk of electric shock.  

Do not store heat press in a wet/ damp area.  

Never pull cord to disconnect the power. Instead, grasp plug and pull to disconnect from power 

outlet.

Make sure you protect the power cord by keeping it away from hot surfaces. Avoid placing objects 

on top of the cord. This could cause damage to the cord and could be a fire hazard risk. 

Do not operate heat press with a damaged cord or if the equipment has been damaged.  To prevent 

risks of injury, please do not disassemble or attempt to repair the heat press by yourself if you are 

not qualify to do so. Instead, call or take it to a qualified service person for examination and repair. 

Incorrect assembly or repair could increase the risk of fire, electric shock, or injury to persons when 

the equipment is used.

If heat press being used by or near children, please make sure that it is supervised. Do not leave 

equipment unattended while connected.

Metal parts on the press can become hot.  Avoid touching the hot metal parts to prevent burns.  

Proceed with caution when using the heat press.

To reduce the likelihood of circuit overload, Joto recommends to use a dedicated circuit if possible.

Make sure that the cord is safely secured so it cannot be pulled or tripped over. 

If you need to use an extension cord, make sure you use a 20 amperage rated cord. Cords rated 

below 20 amperage can overheat. Make sure that the extension cord  is safely secured so it cannot 

be pulled or tripped over. 

 

Note:  This heat press should not be set to exceed 400

˚

F (200

˚

C).  Setting the press tempera

-

ture to above 400

˚

F (200

˚

C) may cause a fire hazard.

PLEASE KEEP THE BOX THAT YOUR HEAT PRESS ARRIVED IN, 

 

ALONG WITH ALL ORIGINAL PACKAGING.

Содержание E-HP-JLF-XSTM-40

















Отзывы: