4
Operation
4.2
Mounting and locking the container
1
2
3
TL403/004
1
Corner fitting of container
2
Pivot head
3
Guide bush
Before putting on the container, make sure the locks are in the
correct position for mounting.
For this, the pivot head and guide bush must be facing the same
way, as shown in Fig. TL403/004.
The container can now be mounted.
Its corner fittings must not show any inadmissible deformations or
inadmissible wear.
4
6
5
7
TL403/005
4
Pivot position indicator
5
Pivot
6
Safety catch
7
Clamping nut
After loading, the corner fitting must lie flush against the lock.
As shown on the left in Fig. TL403/004, the pivot position indica-
tor projects over the side of the housing when the container is
unlocked.
Next, open the safety catch. To do so, push the catch up, turn it 90°
and, with it now horizontal, pull it sideways.
The clamping nut can now be rotated; first slacken it a few turns.
10
MUB 013 005 M30
(REV-B)
07-2020
Twist Locks R 403 Fx
