8
FIG.1
ASSEMBLY INSTRUCTION:
1.PREPARATION:
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above
of this instruction sheet you will find an explosion drawing with all single parts (marked
with numbers) which this item consists of.
2.ASSEMBLY INSTRUCTION:
FIG.2
FIG.2:
Slide the Vertical Seat Post (pt.2) into
the seat post housing on the main
frame (pt.1). Then slide the Seat Post
(pt.23) into the Vertical Seat Post
(pt.2). You will have to slacken the
knurled
section
of
the
Spring
Adjustment Knob (pt.7) and pull the
knob back and then select and align
holes for the desired height. Release
the knob and retighten the knurled
portion.
Now fix the Seat (pt.13) to the Vertical
Seat Post (pt.23) as shown, and
tighten the bolts around the screws
under the seat.
FIG.1:
attach the Front Stabilizer (pt.22) to the
Main Frame (pt.1) using two sets of Ø8
Arc Washers (pt.5), M8 Domed Nut
(pt.6) and M8*75 Carriage bolt (3).
Attach the Rear Stabilizer (pt.14) to the
Main Frame (pt.1) using two sets of Ø8
Arc Washers (pt.5), M8 Domed Nut
(pt.6) and M8*75 Carriage bolt (3).
