3
INSTRUCTIONS
Before using this air saving device, make sure it complies with your request and that it suits your
application!
1. Unpack the unit and visually inspect for any transport damage incurred after leaving our factory.
2. Connect the battery and attach the sensor cone.
3. Connect the headset.
Your air leak detector is now ready for operation.
LEAK DETECTION INSTRUCTIONS
4. Switch the air leak detector ON by turning the dial upwards.
5. Begin to scan by pointing the air leak detector towards the test area (max. range 10mtr.)
6. Listen for a rushing sound from your headset and observe the amplitude meter.
7. When you have detected a possible leak, follow the sound to the loudest point.
8. In order to focus in on the leak, keep turning the dial downwards when the rushing sound is at its
loudest. The rushing sound is at it loudest near to the leak.
9. To confirm a leak focus the air leak detector close to the leak and move it slightly back and forth in all
directions. If the leak is at this location, the sound will increase and decrease in intensity as you sweep
over it.
Switch OFF the unit after use!
Содержание LOCATOR-EV
Страница 1: ...1 Instructions 10 2015...
Страница 4: ...4 1 2 3 4 5 6 7 8 9...
Страница 5: ...5 Sensor cone Detector Battery Battery cover Headset...
Страница 7: ...7 DIMENSIONS mm 60 262 60...
