CONTOUR 1
SLEW LIMITER/FUNCTION GENERATOR
6
SPECIFICATIONS
Module format
Doepfer A-100 ‘Eurorack’ compatible module
3 U, 8 HP, 30 mm deep (inc. power cable)
Milled 2 mm aluminium front panel with non-
erasable graphics
Maximum current draw
+12 V: 90 mA
−12 V: 85 mA
Power protection
Reverse polarity (MOSFET)
I/O impedance
All inputs: 100 kΩ
Analogue outputs: 0 Ω (impedance comp.)
Gate outputs: 1 kΩ
Outer dimensions (H x W x D)
128.5 x 40.3 x 43 mm
Mass
Module: 110 g
Including packaging and accessories: 195 g
SUPPORT
As all Joranalogue Audio Design products,
Contour 1 is designed, manufactured and tested
with the highest standards, to provide the
performance and reliability music professionals
expect.
In case your module isn’t functioning as it should,
make sure to check your Eurorack power supply
and all connections first.
If the problem persists, contact your dealer or
send an email to [email protected].
Please mention your serial number, which can be
found on the product card or on the module’s
rear side.
REVISION HISTORY
Revision D: no functional changes.
Revision C: initial release.
