Joovy Groove Ultralight 0081X, Руководство пользователя

Страница: 2 / 10

Groove Ultralight Instruction Manual
Please read this instruction manual completely before using this stroller. Keep these instructions for future reference.
• Failure to follow these instructions could result in serious injury or death.
• Never leave child unattended.
• Avoid serious injury from falling or sliding out.
• Always use restraint system and ensure the child is positioned according to these instructions.
• Be certain that the stroller is fully opened, the primary lock is secured and the wheel brakes are on before allowing children near the stroller.
• The parking device should always be engaged during the loading and unloading of children.
• The maximum weight of the child that can be seated in the stroller is 55 lbs.
• Fully reclined seat for children 3 months and above. All other seat positions for children 6 months and above ONLY.
• Use of the stroller with a child weighing more than 55 lbs. will cause excessive wear and stress on the stroller and may cause a hazardous
unstable condition.
• Never use this stroller to carry more than one child at the same time.
• Never allow a child to step on the footrest to get into or out of the stroller.
• Do not use the stroller on stairways or escalators.
• Do not add any attachment not specifically recommended by Joovy.
• Any load attached to the handle affects the stability of the stroller. Hanging purses, shopping bags, parcels, changing bags or other accessory
items from handle bars or any other parts of the stroller may change the balance of the stroller and cause a hazardous unstable condition.
• The maximum weight that can be carried in the storage basket is 5 lbs. Excessive weight may result in a hazardous unstable condition.
• The maximum weight that can be placed in the zipper pocket should be less than 1 lb.
• The maximum weight that can be placed in the cup holder should be less than 1 lb.
• Never carry hot beverages or open containers in the cup holder.
• The total weight that can be placed in the in-seat mesh pockets should be less than 2 lbs.
• Never allow your stroller to be used as a toy.
• Discard all packaging materials properly. Do not allow children to play with them.
• Check your stroller for loose rivets, snaps, worn parts, and torn material or stitching on a regular basis.
• Discontinue use of the stroller should it malfunction or become damaged.
If you have a question regarding these instructions, please contact our Customer Service Department at
customerservice@joovy.com or your local distributor. To locate your local distributor, go to www.joovy.com/locator.aspx.
1 Unpacking the Product
• Remove everything from the box and identify the parts using Figure 1.1. (not to scale)
A: stroller, B: two front wheels sets, C: canopy, D: shoulder carry strap and documents (not shown).
• Discard all packaging materials properly including plastic coverings.
• DO NOT allow children to play with any packaging materials.
!
WARNING
!
WARNING
Adult assembly is required for this product. No Tools Required.
2 Unfolding the Stroller
• Keep children away from stroller while unfolding.
• Release the folding lock latch located on the right side by lifting the latch off of the mounting post. See Figure 2.1.
• Lift up on the handle bars of the stroller until the frame is open. Then push down with your foot on the primary lock at the rear center of the
stroller to engage the lock. See Figure 2.2.
CAUTION: While unfolding the stroller, be careful to keep your fingers from being pinched by moving parts.
NOTE: Remove packing foam from rear frame assembly to ensure stroller locks in the open position.
• Ensure the primary lock is secured before ANY use of the product.
!
WARNING
ALWAYS secure the primary lock on the back of the stroller when it is in the unfolded use position. This will prevent collapse of the stroller.
Possible pinching hazard - Be careful when unfolding the stroller.
3 Installing the Front Wheels
• Tilt the stroller so it is resting on the rear wheels and the handle bars.
• Place the front wheel sets onto the front wheel posts until they click in place. See Figure 3.1.
• Pull on the wheel sets to ensure they are installed properly.
• To remove a front wheel set, press the release tab below the front wheel housing and pull the wheel from the post. See Figure 3.2.