background image

Caboose Ultralight Instruction Manual

Page 14

Maintenance

All of the fittings, snaps, locks, rivets, and other hardware and plastic parts on the stroller should be 
inspected periodically to ensure that they are secured properly and not damaged or malfunctioning. 
The seat belts and safety harnesses, as well as all other straps and fabric items and their stitching 
should also be inspected periodically to ensure that they are secured properly and not loose, torn or 
otherwise damaged. All moving parts, such as wheels, brakes, and hinges should also be checked 
periodically to ensure they are operating properly.

Any missing, broken, or worn components should be replaced immediately, and the stroller should not 
be used until they are replaced. Only original manufacturer’s components should be used. If needed, 
please contact Joovy at our toll-free phone number.

Fabric fading may occur if the stroller is left in direct sunlight for long periods of time. When not in use, 
store the stroller out of direct sun. 

 

Cleaning

The fabric material on this stroller can be cleaned using mild household soap or detergent and warm 
water on a sponge or clean cloth. Always allow the fabric to completely air dry before using the stroller.

The frame and wheels should always be kept clean and free of dirt and foreign matter, especially after 
operating the stroller in rain, snow, or other harsh environments.  Use a sponge or cloth dampened with 
warm water and a mild household soap or detergent to clean the wheels after such use.

Содержание Caboose 40X Series





















Отзывы: