Joovv Hardwire Pairing Kit, Быстрый старт

Страница: 3 / 7

3 JOOVV HARDWIRE PAIRING KIT QUICKSTART GUIDE
Pairing Cable Kit steps for Multiple Device Setup
Assemble Joovv
Step 4
Assemble and mount devices then connect AC patch
cables, main AC power cord, and hardwire pairing cables
following the Wire Diagram section on pages 29-32 of the
User Manual.
Set Lead Device
Step 5
Locate the Lead device control panel (Example Joovv
Quad shown).
Press and hold the Power and Light Mode
buttons for 4 seconds to clear the device mode.
Step 6
Press the Power button once or until the display reads
LEAD.
Step 7
Press and hold the Power button for 4 seconds to
confirm. Devices will automatically pair and the Lead
control panel will display the 10:00 minute session timer.
The Lead device is now the controllable device for the
configuration.
Great job! You’re now ready to start Joovvin’!
Cleared Message Device Ready to Lead Lead Mode Message Lead Mode Message
Step 5
Hold for 4 seconds
Step 6
Press once or until
LEAD is displayed.
Step 7
Hold for 4 seconds
Ready to Use
Example Joovv Quad
configuration.
Pairing steps apply
to all multiple device
configurations.
Lead
Control
Panel
Follow
Follow Follow
Lead