Jonsered GT25L Скачать руководство пользователя страница 10

10

uled maintenance. As the small off--road en-

gine owner, you should be aware that Jonsered

may deny you warranty coverage if your small

off--road engine or a part of it has failed due to

abuse, neglect, improper maintenance, unap-

proved modifications, or the use of parts not

made or approved by the original equipment

manufacturer. You are responsible for present-

ing your small off--road engine to a Jonsered au-

thorized repair center as soon as a problem ex-

ists. Warranty repairs should be completed in a

reasonable amount of time, not to exceed 30

days. If you have any questions regarding your

warranty rights and responsibilities, you should

contact your nearest authorized service center

or call Jonsered at 1--916--383--3511.

WAR-

RANTY COMMENCEMENT DATE:

The war-

ranty period begins on the date the small off--

road engine is purchased.

LENGTH OF

COVERAGE:

This warranty shall be for a peri-

od of two years from the initial date of purchase.

WHAT IS COVERED: REPAIR OR RE-

PLACEMENT OF PARTS.

Repair or replace-

ment of any warranted part will be performed at

no charge to the owner at an approved Jons-

ered servicing center. If you have any questions

regarding your warranty rights and responsibili-

ties, you should contact your nearest authorized

service

center

or

call

Jonsered

at

1--916--383--3511.

WARRANTY PERIOD:

Any

warranted part which is not scheduled for re-

placement as required maintenance, or which is

scheduled only for regular inspection to the ef-

fect of ”repair or replace as necessary” shall be

warranted for 2 years. Any warranted part which

is scheduled for replacement as required main-

tenance shall be warranted for the period of time

up to the first scheduled replacement point for

that part.

DIAGNOSIS:

The owner shall not be

charged for diagnostic labor which leads to the

determination that a warranted part is defective

if the diagnostic work is performed at an ap-

proved Jonsered servicing center.

CONSE-

QUENTIAL DAMAGES:

Jonsered may be li-

able for damages to other engine components

caused by the failure of a warranted part still un-

der warranty.

WHAT IS NOT COVERED:

All

failures caused by abuse, neglect, or improper

maintenance are not covered.

ADD--ON OR

MODIFIED PARTS:

The use of add--on or

modified parts can be grounds for disallowing a

warranty claim. Jonsered is not liable to cover

failures of warranted parts caused by the use of

add--on or modified parts.

HOW TO FILE A

CLAIM:

If you have any questions regarding

your warranty rights and responsibilities, you

should contact your nearest authorized service

center or call Jonsered at 1--916--383--3511.

WHERE TO GET WARRANTY SERVICE:

Warranty services or repairs shall be provided

at all Jonsered service centers. Call

1--916--383--3511.

MAINTENANCE,

RE-

PLACEMENT AND REPAIR OF EMISSION

RELATED PARTS:

Any Jonsered approved

replacement part used in the performance of

any warranty maintenance or repair on emis-

sion related parts will be provided without

charge to the owner if the part is under warranty.

EMISSION CONTROL WARRANTY PARTS

LIST:

Carburetor, Ignition System: Spark Plug

(covered up to maintenance schedule), Ignition

Module.

MAINTENANCE STATEMENT:

The

owner is responsible for the performance of all

required maintenance as defined in the instruc-

tion manual.

The information on the product label indicates which standard your engine is certified.

Example: (Year) EPA Phase 1 or Phase 2 and/or CALIFORNIA.

This engine is certified to be emissions compliant for the following use:

Moderate (50 hours)
Intermediate (125 hours)
Extended (300 hours)

Содержание GT25L













Отзывы: