Jonsered FR 2113 A Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 56

background image

English –

27

Replacing the air filter

If the engine seems to lack power or goes irregu-
larly the reason may be that the air filter is clogged.

It is therefore important to replace the air filter at
regular intervals (see ”Maintenance schedule” for
correct service interval).

1. Fold open the engine cover.

2. Pull up the handle on the air filter cover, unhook

and turn towards the engine.

3. Remove the air filter cover.

4. Lift out the air filter cartridge from the fan

housing.

Replace the paper filter if it is clogged with dirt.

MAINTENANCE

IMPORTANT INFORMATION

Do not use compressed air to clean the
paper filter.

Filters should not be oiled. They should be
assembled dry.

5. Carefully lift the precleaner out of the fan

housing. Carefully clean the fan housing so that
dirt does not fall down into the carburetor.

6. Insert a new precleaner and air filter cartridge

in the fan housing.

7. Align the tabs on the cover with the slits in the

housing and replace the air filter cover.

8. Pull the handle outwards. Secure the handle in

the air filter cover and close the cover by
pressing it inwards.

8009-406

8009-409

8009-408

8009-407

8009-410

«
...
27
28
29
30
31
...
»

Содержание FR 2113 A

























































Отзывы:

Нет отзывов

Похожие инструкции для FR 2113 A

Wheel Horse 265-6

Бренд: Toro Страницы: 44

Бренд: Elem Garden Technic Страницы: 58

Бренд: Yard force Страницы: 16

Бренд: Brute Страницы: 44

Бренд: Poulan Pro Страницы: 52

Бренд: Supaswift Страницы: 12

Бренд: Toro Страницы: 2

TH910 Series II

Бренд: Deutscher Страницы: 22

Бренд: Toro Страницы: 4

Бренд: Duramaxx Страницы: 34

Бренд: Bush Hog Страницы: 6

Бренд: Bush Hog Страницы: 31

Бренд: Dolmar Страницы: 76

BERTOLINI 130 S

Бренд: EMAK Страницы: 72

Бренд: Briggs & Stratton Страницы: 12

Бренд: Briggs & Stratton Страницы: 16

Бренд: Simplicity Страницы: 24

Бренд: sunjoe Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды