• As default the settings should be set to “Obtain an IP Address automatically”
• Assigning an IP to the PC, ensure that this IP is not the same as the one you used on the modulator or any
other PC’s you connect to the modulator network. On the example used 192.168.1.200, you can assign
any IP address of the same network range. If you assign a different IP range (e.g. 192.168.5.xx). PC will not
respond to the Modulator.
• Click “OK” to finish your PC settings
IP ADDRESS 192.168.1.200
GATEWAY 192.168.1.1
SUBNET MASK 255.255.255.0
4.2 Login
• You have now assigned an IP address to the PC,
with the same IP range as the Modulator on the
network
• Open an internet browser, in the address bar type in
“192.168.1.168”
This address will take you to our Modulator GUI
• On the welcome screen, enter the password “1234”
then click on “Login” or press the "Enter/Return
Key" to start using the (GUI) graphical user interface
4.2a Log Out
• At the bottom of the side menu, you can click on
"Log Out" to return back to the Login Screen.
15
DIGITAL MODULATOR - 4 x HDMI INPUTS TO DVB-T MPEG4
