PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
E ti
t d A
bl Ti
6 i t
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
Estimated Assembly Time: 6 minutes.
Step 1
Step2
Step3
Make sure all parts could be aligned before assemble
Insert the Harp (I) into the Saddle (G).
Put the light on a level surface to check
Do not rotate lamp body too hard avoid base screw broken
Put the shade(K) on the Harp(I), then
if everything is stable.
Pull cord through lamp base(A) to tighten stem connections
tighten the Finial (L) into the Harp (I)
Pull cord through lamp base(A) to tighten stem connections,
tighten the Finial (L) into the Harp (I)
Screw the tube (B) onto the base (A)
Insert the bulb(J) into the socket(H).
Screw the tube (C) onto the tube (B)
Screw the part (D) onto the tube(C)
Screw the part (E,F,G,H) onto the tube(D)
ENJOY YOUR LAMP
