BULLDOG MINI
1.0
55
Rev.
MAINTENANCE
Does not start up
Sometimes the appliance
does not start given the
strong friction of the
brushes.
Lift slightly by tilting the
handle.
Scrapers left resting
on and stuck to the
conveyors by the dry
residual dirt deposited
from the previous cleaning
operation.
Lift the recovery tank and
clean the scrapers (see
section
"7.3 Replacing the
scrapers"
).
“
Motor Protector
” tripped
Reset the appliance and re-
activate it by pressing the
MP
button on the handle.
Reactivation occurs approx.
after 2 minutes.
Faulty motor.
Contact the Manufacturer.
“
Start&stop
” button switch
tripped.
Replace.
Does not start up
Battery fuse tripped.
Remove the fuse cap on
the battery and replace
with an identical one of 16
Amp.
Do not use fuses
exceeding 16 Amp to avoid
serious risks.
If the fuse trips again,
search for the fault on the
appliance.
Power cord plug not correctly
inserted into the battery.
Restore.
Flat battery.
Re-charge or replace with a
fully charged spare battery.
Vibrations during the work
stages
Warped brushes.
Replace.