Version OS 2.07
5. Sound parameters (menu orange/red)
Summary of menus
Green
Orange
Red
Red blinks
Midi Ch
LFO 1
LFO 2
Split Mode Gate Time
Preset Init
Acc Sens
Acc Dynamic Compression
Gate Mode Metal Noise 1 Metal Noise 2 Bit Mask 2
Volume
CV 1 Dest
CV 1 Amt
Bus Env
CV 2 Dest
CV 2 Amt
Fine Tune
CV 3 Dest
CV 3 Amt
Store
CV 4 Dest
CV 4 Amt
5.1.
LFO
Use the up/down buttons and go to
LFO
.
Choose page 2 (LED lights up orange) by pressing the Page button so that
the display shows LM1.
As long as you are in preset selection mode (no menu) you can just press
the page button and you will enter the LFO 1 menu directly. This was made
in order to quickly edit the LFO section whilst tweaking the knobs and to flip
between both areas.
5.1.1.
LFO 1
Wave < SuP / Sdo / Sin / Si- / tri / tr- / rCt / rC- >
Now turn potentiometer 5 (1_2 Coupl,
Wave
) to change the waveform of
LFO 1. The value is shown in the display. LFO 1 always works firmly on the
pitch of the kick drum.
With the LFO (Low Frequency Oscillator) you can produce periodic low
frequency pitch modulations (vibrato).
ModBase 09 MkII Operating Manual
17
