- 2 -
t 80
c
°
C
IP 65
t 45
a
°
C
Risk Group 2
According to
En62471
Minimum
distance
of
illuminated
objects
0.80 metres from
the lens of the projector.
Maximum
ambient
temperature
Do not operate the fixture if the ambient temperatuer(Ta) exceeds 45
°
C (113
°
F).
Temperature of the external surface
The maximum temperature that can be reached on the external surface of the fitting,in a ther-
mally steadystate
,
is 80
°
C (176
°
F).
IP65
protection
rating
Completely prevent external intrusion and dust entering. Avoid the damages to devi-
ces of water coming from the nozzle from different directions.
Photobiological
Safety
CAUTION.Possibly
hazardous
optical
radiation
emitted
from
this
product
.
Do
not
stare at
operating
lamp
.
May
be harmful
to
the eyes
.
Light collimation system
This product contains internal light
collimation
system
.
Avoid
intense
light
from
any
angle.
The products to which this manual refers comply with the European Directives purs-
uant to
:
EN 60598-1:2015
EN 60598-2-17:1989+A2:1991
EN55015:2013/A1:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN61547:2019
Protection
against electrical shock
Connection must be made to a power supply system fitted with efficient earthing (Class I app-
liance according to standard EN 60598-1) .It is, moreover, recommended to protect the supply
lines of the projectors from indirect contact and/orshorting to earth by using appropriately
sized
residual current devices
.
The projector needs to be positioned so that the objects hit by the beam of light are at least
•Safety of electrical equipment supplied at low voltage ( LVD)
•Electromagnetic Compatibility (EMC)
This device is a moving-head for creating decorative effects and was designed for indoor use only.
If the device ha been exposed to drastic temperature fluctuation(e.g.after transportation).do not weitch it on imm-
ediately.The arising condensation water might damage your device,Leave the device switched off until it has rea-
ched room temperature.
Never run the device without lamp!
Do not shake the device,Avoid brute force when installing or operating the device.
Never life the fixture by holding it at the projectorhead, as the mechanics may be damaged. Always hold the fixtu-
re at the transport handles.
When choosing the installation-spot,please make sure that the device is not exposed to heat,moisture or dust.Th-
ere should not be any cables lying around.You endanger your own and the safety of others!
3.Operating determinations
0.8m