Jolly D6-WP Скачать руководство пользователя страница 20

- 16 -

9.Maintance and cleaning

   It is absolutely essential that the fixture is kept clean and that dust,dirt and smoke fluid residues must not
buildup on or within the fixture. Otherwise, the  fixtures  light-output  will  be significantly reduced. Regular
cleaning will not only ensure the maximum  light-output,  but will also  allow the  fixture  to function  reliably

through out its life. A soft lint-free cloth  moistened  with  any  good  glass  cleaning  fluid is  recommended,
under no circum stances should alcohol or solvents be used!

    The front objective lens will require weekly cleaning as smoke-fluid tends to building up residues,reduc-
ing the light-output very quickly.The cooling-fans should be cleaned monthly.

    The gobos may be cleaned with a soft brush,The interior of the fixture should be cleaned at least annua-
lly usinga vacuum-cleaner or an air-jet.

    There are no serviceable parts inside the device except for the lamp and the fuse.

    Replacing the fuse: If the lamp burns out,the fine-wire fuse of the device might fuse,too.Only replace the 
fuse by a fuse of same type and rating.Before replacing the fuse,unplug mains lead.

   

  

Maintenance and maintenance of the operation, please contact the manufacturer or

 

distributor.

DANGER:Disconnect from the mains before starting any maintenance work.

10.1 Electrical  paramters 

10.Electric equipment specification

SOURCE:

POWER:750

VOLTAGE:

RGBW 36LED-15W+ RGB 144LED-0.2W

W

 

AC100-240V 50/60HZ

Color Temperature:6500K

10.2 Weight and dimensions

Dimensions

405X286.5X537

NET WEIGHT:18Kg

Dimensions

WEIGHT

Dimensions

NET WEIGHT/WEIGHT

mm

 

(

Carton Package

):

mm

(

Carton Package

):

Kg

 

Flight Case -2 lights):

mm

(

Flight Case -2 lights

):

Kg/

Kg

 

515X410X650

24

800X520X735

34

73

10.3 Channel Characteristics

      .

2

3

9

2

 Se ven standard DMX  channel mo del.

         2

Sc an

Pa n

Tilt 360

°

arbitrary position, 360

°

polerotation,Fi xture could auto reset.

     

3

Sh utter

electronic

 

shutter,random

 

strobe.

     

4.  De mme r

lime ar

 

dimme r.

         5

36

 

RGB W lamp can be controlled separately.12X1 2 RGB  Pi xels.

     

6

Th e netwo rk control mo de and DMX  control mo de have independent control and comb ined control.

  

1

5

8 46 6

8

146

169

Содержание D6-WP

























Отзывы: