Jolly Mec AMBRIA2 6 kW, Инструкция по установке, использованию и техническому обслуживанию

Страница: 15 / 40

15
ENGLISH
All appliance tests, final inspection and fine-tuning was performed using the recommended certified pellets.. Jolly
Mec Caminetti S.p.A. is not responsible for malfunctions, breakdowns or problems due to the use of pellets that are not
recommended, as combustion parameters vary according to the quality of the pellets.
To achieve best operational results, it may be necessary to change the default factory settings on the control unit during
the optional Commissioning service. These operations must only be performed by a specialised Technical Service Center.
WARNING
CHAP.06 TECHNICAL DATA
06.1 HOMOLOGATION
Technical specifications resulting from laboratory tests conducted according to EN 14785:2006 test methods at the CERTIFICATION
institute.
Description AMBRIA2 6 kW AMBRIA2 8 kW UM
Nominal burning output 6,9 9,0 kW
Nominal heat output 6,4 8,2 kW
Reduced heat output 2,4 2,4 kW
Nominal output consumption 1,432 1,870 Kg/h
Reduced output consumption 0,53 0,53 Kg/h
Nominal output efficiency 92,0 90,6 %
Rated voltage 230 230 V
Rated frequency 50 50 Hz
Electrical absorption (Switching on - nominal power - reduced power - stand-by) 310 - 60 - 15 - 2,2 310 - 65 - 15 - 2,2 W
Device mass 110 110 Kg
Standard hopper capacity 15 15 Kg
Flue draught (Nominal heat output- Reduced heat output) 10,0 - 8,0 10,0 - 8,0 Pa
Fume exhaust diam. 80 80 mm
Average fume Temperature at nominal output 134,7 167,8 °C
Average fume Temperature at reduced output 91,3 91,3 °C
CO (13% O
2
) at nominal output 61 113 mg/m
3
CO (13% O
2
) at reduced output 461 461 mg/m
3
CO
2
at nominal output 11,22 12,52 %
NOx (13% O
2
) at nominal output 158 139 mg/m
3
OGC (13% O
2
) at nominal output 2 3 mg/m
3
Polveri (13% O
2
) at nominal output 20 20 mg/m
3
Nominal fume mass output 4,4 5,2 g/s
Reduced fume mass output 2,5 2,5 g/s
Average heated area* 43 - 67,7 55,2 - 86,7 m
2
Minimum air distance from inflammable side wall 200 400 mm
Minimum air distance from inflammable rear wall 100 100 mm
Frontal air distance from inflammable material 900 900 mm
Comburent air pipe diameter 50 50 mm
Energy efficiency class A+ A+ -
The declared output may vary according to fuel type.
The above technical specifications were measured with certified quality PELLETS. ONLY use this type of fuel as recommended later in
CHAP.06.2 - RECOMMENDED FUELS.
*According to the typology of building and insulation (Referred to the need of 55 W/m
3
and 35 W/m
3
; room height 2,7 m).