5
AIS CONFIDENTIAL
Installation Guide
Thank you for purchasing the Jolimark Nail Printer (the Product), please follow the instructions below to install and use
this product.
2.1 Unpacking
1.
Open the packaging box
2.
Remove the packaging (cushioning) materials
3.
Take out the product
2.2 Package contents
1.
A Nail Printer
2.
A set of power adapter and power cord
3.
An accessory box (including) :
-
8 bottles of nail gel
-
One piece of Ink cartridge
-
One piece if nail holder
2.3 Product placement and environment
1.
Please place the product on a solid platform in a well-ventilated room, and keep the product away from direct
sunlight.
2.
Please place the product on a well-leveled surface to avoid ink leakage. It is recommended to place the product in
an environment with temperature of 15
℃
~ 30
℃
.
2.4 Product Movement
If it is required to move the product for a long distance under bumpy condition, please put the product back into the
package box and use the packaging (cushioning) materials to pack the product tightly to avoid damage to the product
while moving.
1.
Before moving. turn off power, unplug the power adapter and all power cords, remove the ink cartridge.
2.
Do not tilt the product, place it sideways, or place it upside down during the movement.
3.
If you still keep the packaging material, please put the product back into the package box and use the packaging
(cushioning) materials to pack the product tightly to avoid damage to the product while moving.
4.
If you have any questions, please contact our customer service staff.
Product setting
3.1 Product introduction
