Jolimark FP-8800K, Руководство пользователя

Страница: 42 / 48

Chapter 5 Troubleshooting
Chapter 5 Troubleshooting 5- 3
10. Unexpected printing results.
The gap occurs between the print start position and the top end of paper.
Æ
Adjust the gap by setting #3 - #6 TOF ADJUSTMENT in the SETUP mode.
( The setting on SETUP differs in accordance with each paper path.)
The unexpected printing position occurs right and left.
Æ
Adjust the position moving the tractors or the paper guides right and left.
#12 LEFT MARGIN in the SETUP mode is effective to adjust the position.
The unexpected printing position occurs from the second page of fanfold paper.
Æ
The page length of fanfold paper is not correct.
Set the paper length again using #7 and #8 PAGE LENGTH in the SETUP mode.
The setting on the PC also need to be checked.
The unexpected printing position occurs vertically after the Out-of-paper.
Æ
Select “ PAGE END” at setting of #35 PAPER OUT DETECTION.
11. Restore all the settings in the SETUP mode to the factory default settings.
• EEPROM Initialization 1
Restore the settings in the SETUP mode to the factory default settings.
[Procedure]
Keep the FORMAT and LF/FF keys depressed and turn on the printer.
The message is displayed on the LCD and returns to the
normal display after the initialization 1.
• EEPROM Initialization 2
The learning of the sensors switching position is performed. The settings in the SETUP mode
are not changed.
[Procedure]
Set 15-inch fanfold paper to the rear tractors.
Keep the HIGH SPEED and EJECT/LOAD keys depressed and turn on the printer.
After confirming the paper setting, press the ENTER key.
When the message is displayed, press the FORMAT key.
The printer returns to the normal mode.