3
Safety instructions
JOKE
®
i nstructi on manual
Fi ne dry blasti ng uni t mi kromat 600 eco
5
(8)
Do not carry out any modifications, additions or conversions to
the device!
This also applies to the installation and adjustment of safety
equipment
..
IMPORTANT!
(9) Spare parts must meet the technical requirements specified by
the manufacturer. This can only be guaranteed with original
JOKE spare parts.
(10) Any work on/with the device may only be carried out by quali-
fied, appropriately trained and authorised personnel. Pay atten-
tion to minimum statutory age limits!
(11) Personnel undergoing training or in a general apprenticeship
should only be allowed to work with the machine under the
constant supervision of an experienced operator!
(12) Work on the electrical equipment of the device may be per-
formed only by an electrical specialist according to electro-
technical regulations.
(13) Refrain from any type of work that could jeopardise your safety.
(14) The device may only be used if all protective and safety
equipment is in place and in proper working order.
(15) Do not leave the device unattended when switched on!
(16) Stop and secure the device immediately in the event of mal-
functions! Faults must remedied at once.
(17) Observe processes for switching on and off and control indica-
tors according to the instruction manual!
(18) The mains cable, foot switch cable and compressed-air line
must be laid so as to be tension free and not hinder the user.
Nothing must be allowed to stand on the cables.
(19) The device must be operated only in dry rooms and must not
under any circumstances be exposed to moisture.
The device has no explosion protection!
