joke
I n s t r u c t i o n M a n u a l F M M / 4 H a n d - f i l i n g m a c h i n e
4
Safety instructions
3
(1)
This device has been built according to the latest technical standards and generally
accepted safety regulations. Nevertheless, it can constitute danger to life and limb
for operator or third parties and a hazard to the device itself or other equipment
during use.
(2)
Only use the device if in perfect working order and for its intended purpose. You
must always pay attention to the instruction manual and safety instructions therein
and be aware of the risks! Repair any faults which could affect the device’s safety
immediately by yourself or have these repaired.
The device is designed exclusively for grinding, milling and polishing with the fools
listed and approved in the joke catalogue for surface finishing. Any other use will be
deemed to be contrary to its intended purpose. The manufacturer cannot be held
liable for any resulting damages. The risk is borne solely by the user.
Correct use also includes compliance with the instruction manual and an observa-
tion of the care and maintenance conditions.
(3)
Keep the instruction manual handy at the device’s place of use.
(4)
Pay attention to and observe generally applicable statutory and otherwise binding
regulations relating to accident prevention and environmental protection in addition
to the information provided in the instruction manual!
(5)
All personnel commissioned to work on or with the device must have read this in-
struction manual, and particularly the safety instructions chapter, before starting
work. This applies especially for personnel who only work with the device occa-
sionally.
(6)
Stop the device immediately should you notice changes to the device or its operat-
ing behaviour that are relevant to its safety. Have these remedied before restarting
work.
(7)
Do not carry out any modifications, additions or conversions to the device! This al-
so applies to the installation and adjustment of safety equipment.
(8)
Spare parts must meet the technical requirements specified by the manufacturer.
This can only be guaranteed with original joke® spare parts.
(9)
Any work on/with the device may only be carried out by qualified, appropriately
trained and authorised personnel. Pay attention to minimum statutory age limits!
(10)
Wear safety goggles when working with the handpiece
IM PO RTAN T!
CAUTIO N!
IM PO RTAN T!
CAUTIO N!