Surface Technology
Oberflächentechnik
i
i
10
Connecting a handpiece/hand-filing machine
Connection to the flexible shaft is the same for all handpieces and handfiling machines!
Handpieces/hand-filing machines may not be
fitted/removed whilst the shaft is rotating! Risk
of breaking the carrier!
1. Spring clip system: Push spring clip to-
gether, slide chosen handpiece/hand-filing
machine onto end of shaft and open spring
clip.
The legs of the spring clip should snap into the
corresponding grooves on the handpiece/hand-
filing machine!
2. Rapid-Change System: draw back the bush
on the coupling on the shaft side. Subse-
quently push the handpiece into the coupling
and allow the bush to snap back.
The same applies to both systems: the catch must
be corrected if necessary by rotating the collet
until it engages.
The following flexible shafts are available for the Quick Change motor system:
Figure 7.4 Spring clip system
Figure 7.5 Rapid-Change System
Motor jokeFlex Premium Plus
Length
Order no.:
Flexible shaft Premium Plus with spring clip
1.1 m
0 016 800
Flexible shaft Premium Plus with slip joint
1.1 m
0 016 800-3
Flexible shaft Premium Plus with rapid-change coupling
1.1 m
0 016 900
