JOJO WINGS SONIC, Руководство пользователя

Страница: 24 / 36

JOJO WINGS – SONIC
24
19) Find the group of A lines on one
side of the canopy. With the canopy
held
in front of you as you have it now, the
A lines are the front part of the line
group
that go through the front slider
grommets, the ones that should be
closest to you.
20) Since there is a lot of fabric
between the A and B line attachment
points, it is easy to separate the two
line groups: Look down inside the
first small S fold of the stabilizer and
find the extra bunch of fabric.
Now make the rest of the canopy into S folds like the stabilizers: Put your hand in between the A
and B lines on one side (near where they pass their own grommet) and pull them out to the side.
This will give the cells on one side the correct type of flaking. Now repeat the process with the
other A and B groups, pulling the fold out to the other side. (If you rolled the nose a lot in steps
12-15, you may skip this A-B S-fold since most of the fabric is probably rolled up in the
nose.)
21) Now that you´ve pulled you the canopy between A and B line groups, do the same thing
between B and C lines. Pull the fold of fabric between the two groups out to each side. When you
look down in between the stabilizer folds after you´ve done your flaking,the folds should look
neat like this.
Obr.21
Obr.19 Obr.20
Obr.22