26
STROLLER OPERA
TION
25
STROLLER A
SSEMBL
Y
Stroller Assembly
Please read all the instructions in this manual before assembling and using
this product.
Open Stroller
Separate storage latch from storage mount
(Fig. 4)
, and then lift the handle
upwards
(Fig. 5.1)
, push the foot plate downwards with foot
(Fig. 5.2)
, a click
sound means the stroller is open completely.
!
Check that the stroller is completely open before continuing.
Assemble Front Wheels
Assemble front wheels to front legs. Check that wheels are securely attached
by pulling on wheel assemblies.
(Fig. 6)
To disassemble front wheel, detach front wheel from front leg
(Fig. 7.2)
while
pressing the release tabs outwards.
(Fig. 7.1)
Assemble Rear Wheels
Assemble rear wheels to rear legs
(Fig. 8)
. Check that wheels are securely
attached by pulling on wheel assemblies.
Snap the brake cable into the fixing tabs under square tubes to fix it.
(Fig. 9)
Assemble Hood
Align the holes of the hood mounts with the posts on the tubes, and then insert
to assemble the hood
(Fig. 10)
, stick the hook and loop fasteners, snap the
buttons to attach the rear hood to backrest.
(Fig. 11)
The completely assembled stroller is shown as
(Fig. 12)
Stroller Operation
Adjust Recline
There are 5 angles for the backrest.
Squeeze the adjust button
(Fig. 13.1)
, and then adjust the backrest to a
desired angle.
(Fig. 13.2)
!
The hood must be fixed by button / hook and loop fastener on the backrest
when the backrest in flat position.
To raise the backrest, push up.
!
Make sure the recline is set properly for use.
Use Buckle
Release Buckle
Press the center button to release the buckle.
(Fig. 14)
Lock Buckle
Match the waist belt buckle with the shoulder buckle
(Fig. 15.1)
, and click into
the center buckle.
(Fig. 15.2)
A “click” sound means the buckle is locked
completely.
(Fig. 15.3)
!
To avoid serious injury from falling or sliding out, always secure your child
with harness.
!
Make sure your child is snugly secured. The space between the child and
the shoulder harness is about the thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on child’s neck.
Use Shoulder & Waist Harnesses
!
In order to protect your child from falling out, after your child is placed into
the seat, check whether the shoulder and waist harnesses are at proper
height and length.
Fig. 16.1
Shoulder harness anchor A
Fig. 16.2
Shoulder harness anchor B
Fig. 16.3
Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder
slots. For smaller child, use shoulder harness anchor B and the lowest
shoulder slots.
To adjust the position of the shoulder harness anchor, turn the anchor to be
level with the side facing forward. Thread it through the shoulder harness slot
from back to front.
(Fig. 17)
Rethread it through the slot that is closest to
child's shoulder height.
(Fig. 18)
Use slide adjuster to change the harness length.
(Fig. 19.1)
Press the button
(Fig. 19.2)
, while pulling the waist harness to proper length.
(Fig. 19.3)
Содержание nitro S1036
