Joie Litetrax S1112, Инструкция по эксплуатации

Страница: 16 / 19

28
STROLLER OPERA
TION
27
STROLLER A
SSEMBL
Y
Stroller Assembly
Please read all the instructions in this manual before assembling and using
this product.
Open Stroller
Separate storage latch from storage mount (Fig. 4) ﹐ and then lift the handle
upwards (Fig. 5) ﹐ a click sound means the stroller is open completely. Open the
snaps attached to the webbing which on the lower right of seat plate﹐ and
through the webbing into D ring﹐ then attach the snaps.
(Fig. 5.1)
! Check that the stroller is completely open before continuing.
Assemble Front Wheel
Assemble front wheel to front leg. Check that the front wheel is securely
attached by pulling on wheel assembly.
(Fig. 6)
To disassemble front wheel﹐ detach front wheel from front leg (Fig. 7.2) while
pressing the release tabs outwards. (Fig. 7.1)
Assemble Rear Wheels
Align the axle of the rear wheel with the rear wheel mount﹐ and then insert to
assemble the rear wheel
(Fig. 8) . Check that wheels are securely attached by
pulling on wheel assemblies.
To disassemble rear wheel﹐ detach rear wheel from rear wheel mount
(Fig. 9.2)
while pressing the release button. (Fig. 9.1)
Assemble Armbar
Align the armbar end slider with matching fixing slot﹐ and then insert to lock.
(Fig. 10)
To disassemble armbar﹐ press armbar release button (Fig. 11.1) ﹐ and then pull
up the armbar. (Fig. 11.2)
The completely assembled stroller is shown as Fig. 12
Stroller Operation
Adjust Backrest
Recline Backrest
Pull the backrest backwards﹐ while pressing the button in the center of the
angle adjuster.
(Fig. 13)
! The canopy must be fixed by hook and loop fastener on the backrest when
the backrest in flat position.
Raise Backrest
Push the backrest forwards﹐ while pulling the webbing at the end of the angle
adjuster.
(Fig. 14.1)
! Make sure the recline is set properly for use.
Use Buckle
Release Buckle
Press the center button to release the buckle.
(Fig. 15)
Lock Buckle
Match the waist belt buckle with the shoulder buckle
(Fig. 16.1) ﹐ and click into
the center buckle. (Fig. 16.2) A “click” sound means the buckle is locked
completely. (Fig. 16.3)
! To avoid serious injury from falling or sliding out﹐ always secure your child
with harness.
! Make sure your child is snugly secured. The space between the child and
the shoulder harness is about the thickness of one hand.
! Do not cross the shoulder belts. This will cause pressure on child’s neck.
Use Shoulder & Waist Harnesses
! In order to protect your child from falling out﹐ after your child is placed into
the seat﹐ check whether the shoulder and waist harnesses are at proper
height and length.
Fig. 17.1 Shoulder harness anchor A
Fig. 17.2 Shoulder harness anchor B
Fig. 17.3 Slide adjuster