Johnson Travel, Инструкция по эксплуатации

Страница: 13 / 24

13
• Before using the iron for the first time, make sure
that you have removed all the
labels or protection films from the plate. Clean the
plate using a soft cloth.
• Some parts of the iron are slightly lubri-
cated and therefore the appliance, at the moment of
the first lighting up, could give out a bit of smoke.
This smoke will stop in a short time.
• Always keep the ironing plate “B” always smooth;
do not make it slide on metallic objects (ex. Iron sup-
port grid, metal buttons, zippers, etc…)
• Do not leave water in the machine when the room
temperature is 0° C or below.
• Do not fill the appliance under a running tap.
• Do not allow the supply cable to come into contact
with the ironing plate.
• Do not overfill the water tank and do not add stain-
removers or similar products to the water.
• After each use, wait until the iron is completely cold
and always empty the reservoir from remaining
water.
ATTENTION :
The anti-limestone cleaning effected by service cen-
tres is not covered by the guarantee it is therefore at
charge of the customer.
ATTENTION :
Only pour distilled or demineralised water into the tank.
ATTENTION :
NEVER USE TAP WATER
Tap water with impurities and limescale deposits may
obstruct the holes of the plate.
ATTENTION :
If the need should arise to clean the limescale depo-
sits (not covered by warranty and therefore at the ex-