SETTING LEGACY MODE FOR TRACKING
a. Push
Menu Down
once so
Options System
is displayed at
the bottom of the screen.
b. Press the
Left Softkey
button to enter the
Options
menu.
c. ‘
AutoPilot Mode
’ should be highlighted, press the
to
confirm.
d. Once in the
AutoPilot Mode
menu, select
Legacy
, scroll
up, and push the
to confirm selection.
e. Push the
Right Softkey
button to exit to the main screen.
f. Hold
for a couple of seconds to power off the remote
to be stored with the drive.
K 01.1332.0075 REV B | 4
OLDTOWNCANOE.COM
INSTRUCTIONS
INSTRUCTIONS
1
2
3
SYNCING REMOTE TO MOTOR
a. With the battery and motor plugged into the hull, deploy
the drive and ensure power is connected.
b. Turn on remote by pushing the
(OK) button. Press the
again to accept the warning message.
c. Push
Menu Down
once, so
Options System
is displayed at
the bottom of the screen.
d. Press the
Right Softkey
button to enter the
Systems
menu.
e. Using the
Menu Down
, navigate to
Pair
and push the
button.
f. Press and hold the
Pair
button on the top of the motor
head (motor must be powered).
g. Motor will have a sustained beep when paired successfully.
h. Confirm motor function by using the
Steer Left
and
Steer
Right
arrows to turn the steering servo, the
Prop
button,
and the
+/-
to turn the motor shaft on.
SETTING BOAT LENGTH OFFSET
a. Push
Menu Down
once so
Options System
is displayed at
the bottom of the screen.
b. Press the
Right Softkey
button to enter the
System
menu.
Using the
Menu Down
, navigate to
Boat Scale
and push
the
button.
c. Set
Boat Scale
to -2, by scrolling to -2 and pushing the
button.
d. Push the
Right Softkey
button to exit to the main screen.
3a
2a
3d
2c
3e
2d
3c
2b
1d
1e
1f
Pair Button
Содержание Old Town Sportsman iPilot
Страница 1: ...iPilot Remote Sync Guide...
