6
CHANGING BATTERIES AND ACTIVATING LASER BEAM
Unscrew the cover on the back top of the unit and insert four (4) AA batteries
(included). To turn on, rotate the on/off switch in the direction indicated by the
arrow.Turning the knob will increase or decrease the rotation speed.
Please Note:
Used/discharged batteries are hazardous waste and must be
disposed of properly.
ASSEMBLY AND ADJUSTMENT
Open up the tripod and position it firmly on a surface that is even and as near level as
possible. For uneven surfaces and inclines, compensate by adjusting the
telescoping legs of the tripod.
Tightly screw the unit and tripod together.
Bring the unit into a level position by means of the three (3) adjusting screws and the
three (3) built-in vials.
The rotary laser can be used either with the tripod or independently.
PREPARING FOR USE
To obtain accurate measures, use the leveling screws found on the mounting base
and ensure that the bubble in each vial is perfectly centered. Utilize the speed
control knob to create a single laser point or an intermittent line or a continuous line.
Caution:
Due to the 360° rotating feature of the laser beam, extra care must be
taken to avoid direct contact with the eyes.
