21
Thank you for choosing “Air Force” product suitable for hotels, offices, waiting rooms,
public places, etc.
INSTALLATION
-Installation must be carried out according to the regulations in force in the country and
by a qualified electrician.
-The appliance can only be installed on a wall.
-Make sure that the wall on which you plan to mount the appliance is solid and that
there are no electric cables or water pipes inside.
-The appliance is intended for internal use only.
-It is recommended to avoid installing the towel/hair near high-reflection objects (such
as mirrors, stainless steel sinks, etc.) in order to avoid a malfunction of the presence /
functioning sensor.
-Make sure you have turned off the electricity before carrying out any operation.
- Place the template, (fig.1) Contained in the package, on the wall in the desired position
(a height from the ground of 120 cm is recommended) and mark the position of the 4
mounting holes with a pencil.
- Hole the wall with a 8 mm diameter drill bit.
Unscrew the 2 allen screws (fig.2) in the lower part of the towel/hair. Disconnect the
front body (fig.2) And unhook the grounding faston connector (fig.3) and the 2 connec-
tors that connect the presence/operating sensor (fig.3) and the blue leds (fig.3) to the
power supply.
- Mount the base of the towel/hair (fig.4) on the wall, using the dowels supplied.
If you want to make a direct connection to the power supply: (fig.5)
a-connect the live cable (brown, red or black) to the terminal block marked “L”
b-connect the neutral cable (black, blue) to the terminal block marked “N”
c-connect the earth cable (yellow-green) to the terminal block marked with the earth
symbol.
- The preset setting of the reading distance of the presence / functioning sensor is 12 -
15 cm. from the air outlet nozzle. It is possible to change the reading distance by acting
on the potentiometer (fig.6) Located inside the appliance. Turning clockwise (towards
right) the reading distance increases, turning counter-clockwise (towards left) the rea-
ding distance decreases.
-Replace the front body (fig.8) After reconnecting the faston connector (fig.7) To the
earth and the 2 connectors that connect the presence / functioning sensor (fig.7) And
the blue LEDS (fig.7) To the power supply, paying attention not to over tighten the 2
screws (fig.8).
-Connect the towel / hair plug to the power outlet (if a direct connection has not been
made) and switch on the power supply again
OPERATION
Place your hands (or hair) under the presence / operating sensor to start the drying
operation.
A blue LED light helps guide the user towards the flow of air. Rub your hands lightly and
quickly for faster drying.
After drying, move your hands (or hair) from the presence / operating sensor, the ap-
pliance stops automatically after a few seconds.
The air outlet nozzle rotates 360 °, making it easier to dry other parts of the body, or
simply change the air outlet direction. By placing the air outlet upwards it is possible to
dry the face.
Содержание Air Force
Страница 3: ...3 fig 1 fig 2 fig 3 fig 4 Ø 8mm ...
Страница 4: ...4 fig 5 fig 6 fig 7 ...
