©2019 Johnson Level & Tool - Rev. 3
15
Notes:
• When the unit is in TILT mode, pressing the slope mode button and
entering the dual axis mode will exit you from the TILT mode and go
into the slope mode.
• When using the laser in the single slope mode, the slope feature
can be used and the laser is self-leveling. When using the slope
mode in X-direction the X-axis LED is on and the Y-axis LED is
flashing. When the laser is positioned on its side in the vertical
mode, the vertical laser line can be moved to the left or right.
Timed Auto-off Function
Turn the unit on using the power button on the laser keypad. Press the
power button once on the remote control. The unit is now in sleep
mode. The rotating beacon and laser beam will be powered down.
If the unit is in sleep mode for 30 continuous minutes, the unit turns off
automatically. With a second press of the power button on remote control,
the unit exits sleep mode and enters self-level mode.
Remote Control Shield Key
The remote control function is on when the laser is turned on
and the remote control LED is on. Press this key and the remote
control LED goes off. The laser does not receive a remote control
signal.
Using the Laser in the Vertical Mode
Set the laser on a flat surface with the keypad facing up.
English 2019_Manuals 3/27/19 10:24 AM Page 15
