Johnson 3X, Инструкция по эксплуатации

Страница: 29 / 32

29
INSTRUCTIONS FOR USE
Once the fan has been fully assembled in one of the three configurations, insert the
plug into a suitable socket to receive it.
To start ventilation, turn the selector (G) to 1 ­ 2 or 3 corresponding to the 3 fan rotation
speeds.
1: weak air flow
2: medium air flow
3: strong air flow
To interrupt ventilation, set the selector (G) to 0.
To swing the ventilation (rotation from one side to the other), push down the oscillation
selector (F) located on the upper part of the motor body (E). To stop the oscillation, pull
the oscillation selector (F) upwards.
When used as a stand, to adjust the height of the ventilation, loosen the ring nut (J),
extract the extendable tube (I) until the desired height is reached and lock the ring nut
(J) again.
CLEANING
Turn off and disconnect the power supply before assembling, disassembling or clea­
ning the device.
Keep the air intakes on the back of the body free from dust or lint. Using a vacuum cle­
aner if necessary to remove dirt. Never enter the grids with any object or tool to remove
fluff.
The fan body can be cleaned with a damp cloth or sponge. Prevent water or other liquids
from entering the appliance.
ATTENTION: do not use aggressive detergents, chemical detergents or solvents. could
damage the finish of the appliance.
Ecodesign requirements
Product information requirements
Maximum fan flow rate
F 60,72 m 3 /min
Fan power input P W
Service value SV (m 3 /min)W
Measurement standard for service value IEC 60879: 1986 (corr. 1992)
Standby power consumption
PSB W
Fan sound power level LWA dB(A)
Maximum air velocity C meters/sec
Seasonal electricity consumption Q KWh/a
Contact details for obtaining more information
JOHNSON S.r.l V.le Kennedy, 596
21050 Marnate (VA) Italy
79,81
0,76
0,42
63,93
3,46
26,01