16
©2011 Johnson Level & Tool
Indirect Measurement 3 (3 shot measurements PARTIAL Height)
Press and release Indirect Measure button three times to enter mode.
Aim laser at targeted measuring surface observe flashing line on screen.
Press and release Measure button to record first measurement.
Hold instrument position and pivot to aim laser at second target
observing flashing line on screen.
Press and release Measure button to record second measurement.
Hold instrument position and pivot to aim laser at third target.
Press and release Measure button to record third measurement.
Pythagoras calculation (partial height) will be presented in main screen
position at bottom.
Note:
Unit of measure for each Pythagoras function is capable of being
displayed in decimal (feet, inches or metric) or inches and feet to 1/32.
Simply press and hold to scroll through each unit of measure.
Stake-out
Stake-out mode is designed to mark off repetitive
equal distances. For example, fence post installation
or framing.
1. To use Stake-out, you have to set one value or “stake” in memory.
2. Turn the unit on.
3. Press and release three times to enter the first stake setting.
4. Press to increase your value.
5. Press to decrease your value.
6. Hold for two seconds to shift to positions.
7. Once value is set, press to enter.
4533H-English_Manuals 4/1/11 10:49 AM Page 16