Reset Button Operation and Descriptions
If you lose your password or if you want to restore the unit to factory defaults, the MAP Gateway
offers two reset functions: a
Network Reset
function that resets Wi-Fi and Ethernet settings, and
a
Reset to Factory Defaults
function that resets all unit settings (including user profiles). Reset to
Factory Defaults also resets your SSL certificate to the Johnson Controls
®
self-signed certificate that
is in the device when it comes from the factory.
The
Network Reset
function is intended for individuals who forget their Wi-Fi connection
information, and the
Reset to Factory Defaults
function is for use by administrators who may
want to clear all user profiles from a device. For information on resetting the unit, see Table 2.
Important:
To use a unit that is reset to factory defaults,
you must have
the default login
information supplied in the Quick Start Guide that shipped with the unit. This includes the
factory SSID and passphrase. The Reset to Factory Defaults function
does not
change the
version of the application. If you did a software upgrade, the MAP Gateway remains at the
upgraded version rather than resetting to the version that it was running when it left the
factory.
The reset button is on the back of the device, and it is embedded into the MAP Gateway housing so
that it cannot be activated by accident. To reach the reset button, use a small screwdriver or similar
• If you are connected to the network when you use the reset button, you are disconnected.
• If you press the reset button for more than 9 seconds, the reset operation is cancelled.
• If a fault condition already exists, the reset button is disabled.
Mobile Access Portal Gateway Installation Guide
20
