background image

Master Catalog

125

Humidity Controls Section

W

Product/Technical Bulletin

W43A

Issue Date

1095

© 1995 Johnson Controls, Inc.

1

Part No. 24-8466-1, Rev. —
Code No. LIT-125715

W43A Humidistat

The W43A Humidistat controls humidifying and/or
dehumidifying equipment.  Typical uses include the
control of humidity by ventilation, air conditioning,
humidifiers, and dehumidifiers in residential,
commercial, and industrial installations.

The W43A has Single-Pole/Double-Throw (SPDT)
snap-acting contacts rated to switch 1/4 hp motors.  It
has a wide setpoint range of 0 to 70% Relative
Humidity (RH), as well as “off” dial positions for
humidification and dehumidification.  The differential of
the W43A is fixed at approximately 6% RH.

Figure 1:  W43A Humidistat with Vertical Faceplate

Features and Benefits

Human Hair Sensing Element

Provides stable, accurate measurement

1/4 hp (6A) Rated Contacts

Permits direct operation of many fans in
commercial applications

High/Low Adjustable Knob
Range Stops

Allows adjustments within a desired range

Enclosed Pennswitch

Provides dust protection for contacts

Mounting Plate

Allows easy mounting and wiring without
removing the cover

Содержание W43A









Отзывы: