User Manual: VCC-64
7
Rev.0.3
Mark
Description
Type
Signal
Activation
G
Reference for power supply
(negative pole)
Input
Connect to the negative pole of the
power supply.
12V
Continuous power supply
(positive pole)
Input
Connect to the negative pole of the
power supply (max 100 mA / 1.2V
dc).
D-
Serial connection port for
integration RS-485. Terminal D-
Port
D-
Standard RS-485/9600/8/SPACE/1
D+
Serial connection port for
integration RS-485. Terminal D+
Port
D+
Standard RS-485/9600/8/SPACE/1
Table 3 - Connections
2.2.2 Bus Address
The VCC-63 has a DIP-Switch to configure the address in the RS-485 bus. Every controller
assigned to the same zone should have the same address configuration. For different zones
different address should be assigned.
Address
DIP-SWITCH
0
1
2
3
4
5
6
7
Table 4 - Bus Addresses
2.2.3 Cabling
The VCC-64 is connected to the system's interface through bus mode, and every VCC-64 will
be connected to each other. Only one VCC-64 has to be connected to the system's interface.
