Chapter 3.0 The PowerSeries Pro Security System
3.0 The PowerSeries Pro Security System
The PowerSeries Pro has been designed to provide the greatest possible flexibility and
convenience. Read this manual carefully and have the installer provide instructions on how to
operate the system and which features have been implemented. All users of this system
should be equally instructed in its use.
Fill out the "System Information" section with zone information and access codes and store this
manual in a safe place for future reference.
3.1 General System Operation
This security system is made up of a PowerSeries Pro control panel, one or more keypads and
various sensors and detectors. The metal cabinet contains the system electronics and standby
battery. The keypad is used to send commands to the system and to display the current
system status. The keypad(s) are mounted in a convenient location inside the protected
premises close to the entry/exit door(s). The security system has several zones of area
protection, each connected to one or more sensors (motion detectors, glassbreak detectors,
door contacts, etc.).
Note:
Only the installer or service professional shall have access to the control panel.
3.2 Testing the System
Tests all system keypad LEDs, keypad sounders, bells and/or sirens. To ensure the system
continues to function as intended, test your system weekly.
IMPORTANT:
Should the system fail to function properly contact the installation company.
IMPORTANT:
All smoke detectors must be tested by the smoke detector installer once per
year.
- 6 -
