Camera Installation (continued)
Figure 7
3.
To securely attach the camera base to the mount you must insert the two
mounting screws provided with the mount into the two holes on the camera
base (Figure 9).
4.
Adjust the four camera modules (Figure 8) on to the four magnetics on the
camera base to ensure the best view.
Note:
Align the four camera modules as per one of the three examples
shown in Figure 8.
Note:
Ensure that the camera modules are level with the dome and that the
base guide is resting flat on the magnetic track.
Figure 8
Security
Mount installation (IBCR-M-ISWT-0) continued
Figure 3
In the box (IBJB-M-ISWB-0)
•
1 - Junction bracket mount
•
2 - Mounting screws (these attach the camera to the mount)
•
4 - Screws and screw anchors
•
1 - Safety lanyard
•
1 - Quick Start Guide
•
1 - Mounting Template sticker
•
4 - #8-32 3/4"" screws (for use with a '4-11/16" ' electrical box)
•
2 - #6-32 x 1/2" screws (for use with a single-
gang’ electrical box)
Installation tools (IBJB-M-ISWB-0)
•
Drill
•
Screwdriver
Mount Installation (IBJB-M-ISWB-0)
You can attach the junction bracket mount directly to a wall / ceiling surface
or
to a
‘single-gang’ electrical box or '4-11/16" ' electrical box.
1.
Wall / ceiling installation:
Place the mounting template sticker on to the
mounting surface and drill four screw holes, cut out a cable hole and then
insert the four screw anchors into the four screw holes.
OR
Electrical box installation:
Align the four holes on the junction bracket
mount (1) (Figure 4) with the four holes on the mounting surface or
‘4-11/16’’
electrical box (2) (Figure 4)
or
align the two holes on the junction bracket
mount (1) (Figure 5) with two holes on the single gang electrical box (2)
(Figure 5).
2.
Insert the four / two screws into the four / two holes on the junction mount
bracket and securely attach the mount to the mounting surface or electrical
box.
3.
Attach the safety lanyard to the ‘hook’ on the mount cover (1) (Figure 6) and
the ‘hook’ on the camera base.
Mount Installation (IBJB-M-ISWB-0) continued
4.
Follow the steps in the Camera Installation procedure to secure the camera
to the mount
.
Figure 4
Figure 5
Mount Installation (IBJB-M-ISWB-0) continued
Figure 6
Camera Installation
1.
Hold the camera base up to the mount and place all cables through the
cable hole on the camera mount.
2.
Align the two metal pins on the top of the camera base with the two holes
on the mount and rotate the camera base so that the camera base sits into
the mount.
Note:
The bridge on the camera base (Figure 7
) aligns with the ‘lock’ and
‘unlock’ bridges on the mount.
Camera Installation (continued)
Figure 9
Note:
Ensure that the camera module angle does not exceed 60 degrees.
See Figure 10.
