TFP2228
Page 3 of 4
and after installation. Nozzles damaged
by dropping, striking, wrench twist/
slippage, or the like, must be replaced.
Also, replace any nozzle that has a
cracked bulb or that has lost liquid from
its bulb (Ref. Installation section).
Frequent visual inspections are recom-
mended to be initially performed for
nozzles installed in potentially corro-
sive atmospheres to verify the integ-
rity of the materials of construction
and finish as they may be affected by
the corrosive conditions present for a
given installation. Thereafter, annual
inspections per applicable standards
are required, in addition to inspec-
tions required by the authority having
jurisdiction.
The owner is responsible for the
inspection, testing, and maintenance of
their fire protection system and devices
in compliance with this document, as
well as with the applicable standards
of any other authorities having juris-
diction. Contact the installing contrac-
tor or product manufacturer with any
questions.
Water mist systems should be in-
spected, tested, and maintained by a
qualified Inspection Service in accor-
dance with local requirements and/or
national codes.
Care and
Maintenance
TYCO Ultra Low Flow AQUAMIST Type
ULF AM28 Nozzles must be maintained
and serviced in accordance with this
section.
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system
that it controls, obtain permission to
shut down the affected fire protection
system from the proper authorities
and notify all personnel who may be
affected by this action.
Nozzles which are found to be leaking
or exhibiting visible signs of corrosion
must be replaced.
Automatic nozzles must never be
painted, plated, coated, or other-
wise altered after leaving the factory.
Modified nozzles must be replaced.
Nozzles that have been exposed to
corrosive products of combustion, but
have not operated, should be replaced
if they cannot be completely cleaned
by wiping the nozzle with a cloth or by
brushing it with a soft bristle brush.
Care must be exercised to avoid
damage to the nozzles before, during,
Limited
Warranty
For warranty terms and conditions, visit
www.tyco-fire.com.
Ordering
Procedure
Contact your local distributor for avail-
ability. When placing an order, indicate
the full product name and part number
(P/N).
Type ULF AM28 AQUAMIST Nozzles
Specify: Type ULF AM28 AQUAMIST
Nozzle with 57ºC (135ºF) tempera-
ture rating, finish (specify), and P/N
(specify):
Natural Brass . . . . . . . . . . . . . . . . . 49-028-1-135
Pure White (RAL9010)
a
. . . . . . . . .49-028-3-135
Signal White (RAL9003)
b
. . . . . . . .49-028-4-135
Chrome Plated . . . . . . . . . . . . . . . .49-028-9-135
a. Eastern Hemisphere sales only
b. Formerly known as Bright White
Escutcheon
Specify: Style 20 Recessed Escutch-
eon with (specify*) finish, P/N (specify*)
* Refer to Technical Data Sheet TFP770
Wrench
Specify: W-Type 6 Sprinkler Wrench,
P/N 56-000-6-387
Specify: W-Type 7 Sprinkler Wrench,
P/N 56-850-4-001
