Frequency band (MHz)
Maximum power
DSC1800 1710.2 - 1784.8
Class E2 (0.5 W) @ 900 MHz, EDGE
WCDMA (band VIII) 882.4 - 912.6
Class E2 (0.4 W) @ 900 MHz, EDGE
European single point of contact:
Tyco Safety Products, Voltaweg 20, 6101 XK Echt, Netherlands.
Notes for EN50136-1:2012 compliant installations (applicable only to models 3G9080-EU and GS9080):
The models
3G9080-EU and GS9080 connect to compatible DSC alarm control panels HS3128, HS3032 using the DSC proprietary serial interface.
The module operates in pass-through mode and it does acknowledge the alarm to the compatible control panel after an
acknowledgement has been received from the compatible alarm receiver.
1.
The 3G9080-EU ,GS9080 module is monitored by the control panel and it is programmed via the programming menu available
from the compatible keypad connected to the alarm control panel HS3128, HS3023. The module is connected as shown in the
diagram included in this manual.
2.
The HSPA 3G/GSM Cellular path is immune to conducted and radiated RF fields with levels up to 10V/m as tested per
EN50130-4 Standard.
3.
The 3G9080-EU, GS9080 module conforms with radiated emissions levels for Class B equipment as per standards EN61000-6-
3/EN55032/CISPR32.
4.
The 3G9080- EU module has only one communication path: HSPA 3G or GSM Cellular communication path using
900/1800/2100MHz Public Cellular Network. The HSPA 3G/GSM Cellular communication path that can be used in an ATS with
the follwoing categories:
l
Single Path mode SP4, or
l
Dual Path mode DP2 in conjunction with the compatible control panel HS3128/HS3032 integrated PSTN communicator or
l
Dual Path DP3 in conjunction with the compatible control panel HS3128/HS3032 integrated Ethernet communicator.
5.
3G9080-EU, GS9080 has been tested for compliance in conjunction with the following applicable standards: EN50136-1:2012,
EN50136- 2:2013, EN50131-10:2014, ATS configuration: SP3, DP2, DP3. For EN50131-1:2006/A1:2009 /A2:2017 compliant
installations, the following programming options shall be set as described: Supervision heartbit set to 180 s for SP4 and DP4
configuration along with the ARC receiver supervison window set to 180s. For DP2 configuration the supervison shall be set to
30 min. 3G9E80- EU, GS9080 has been certified by Telefication in accordance with EN50131-1:2006/A1:2009/A2:2017,
EN50131-10:2014 requirements for Grade 2, Class II and EN50136-2:2013 Configuration: SP4, DP2, DP4.
COST OF SUBSTITUTE OR REPLACEMENT EQUIPMENT, FACILITIES OR SERVICES, DOWN TIME, PURCHASERS TIME, THE CLAIMS
OF THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY.
DSC recommends that the entire system be completely tested on a regular basis. However, despite frequent testing, and due to, but
not limited to, criminal tampering or electrical disruption, it is possible for this SOFTWARE PRODUCT to fail to perform as expected.
Regulatory Information
FCC MODIFICATION STATEMENT -
Digital Security Controls has not approved any changes or modifications to this device
by the user. Any changes or modifications could void the user’s authority to operate the equipment. Digital Security Controls
n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la nature. Tout changement ou modification
peuvent annuler le droit d’utilisation de l’appareil par l’utilisateur.
FCC AND ISED CANADA INTERFERENCE STATEMENT -
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device. This device complies with ISED Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radio électrique subi, même si le brouillage est susceptible d'en comprom-ettre le fonctionnement.
FCC CLASS B DIGITAL DEVICE NOTICE
-This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/television technician for help.
CAN ICES-3 (B) / NMB-3 (B)
Model LE9080 FCC ID: F5318LE9080 IC: 160A-LE9080
Model 3G9080 FCC ID: F53173G9080 IC: 160A-3G9080
Model 3H9080 FCC ID: F53183H9080 IC: 160A-3H9080
Note:
Only models LE9080, 3G9080 and 3H9080 are UL/ULC listed.
FCC/ISED CANADA WIRELESS NOTICE
This equipment complies with FCC and ISED Canada radiation exposure limits set forth for an uncontrolled environment. The
antenna should be installed and operated with minimum distance of 20 cm between the radiator and your body.
Cet appareil est conforme aux limites d'exposition aux ray-onnements de la ISED Canada pour un environnement non contrôlé.
L'antenne doit être installé de façon à garder une distance minimale de 20 centimètres entre la source de rayonnements et votre
corps.
Antenna gain must be below. Gain de l'antenne doit être ci-dessous:
Frequency band/Bande de fréquence LE9080
3G9080 3H9080
GSM850/FDD V
1.3 dBi
1.4 dBi 1.3 dBi
PCS1900/FDD ii
6.8 dBi
6.7 dBi
LTE B2
6.8 dBi
LTE B4
4.6 dBi
LTE B5/B12/B13
1.3/1.2/2.2 dBi
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. L'émetteur ne doit pas
être colocalisé ni fonctionner conjointement avec à autre antenne ou autre émetteur.
FCC/IC LABEL:
This modular transmitter LE9080, 3G9080 or 3H9080 is labeled with its own FCC ID and IC number. When the
module is installed inside the host device HS3256, HS3128 or HS3032 and the FCC ID/IC of the module is not visible, the host device
shall display the provided label referring to the FCC ID and IC of the enclosed module. This label is shipped together with the
module and it is the responsibility of the integrator to apply it to the exterior of the enclosure as displayed in the following figure. Le
modulaire émetteur LE9080, 3G9080 ou 3H9080 est étiqueté avec son propre ID FCC et le numéro IC. Lorsque le module est
installé à l'intérieur du dispositif hôte HS3256, HS3128 ou HS3032 et la FCC ID / IC du module ne soit pas visible, le dispositif
d'accueil affiche l'étiquette fournie se référant à l'ID FCC et IC du module ci-joint. Ce label est livré avec le module et il est de la
responsabilité de l'intégrateur de l'appliquer à l'extérieur de l'enceinte, comme indiqué dans la figure suivante.
Model LE9080 Contains FCC ID: F5318LE9080 Contains IC: 160A-LE9080
Model 3G9080 Contains FCC ID: F53173G9080 Contains IC: 160A-3G9080
Model 3H9080 Contains FCC ID: F53183H9080 Contains IC: 160A-3H9080
SIMPLIFIED DECLARATION OF CONFORMITY:
Hereby, Tyco Safety Products Canada Ltd declares that this radio
equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address.
Note:
Applies to models 3G9080-EU and GS9080 only.
Model 3G080-EU - http://dsc.com/pdf/1804001
Model GS9080 - http://dsc.com/pdf/1804002
Operating frequency bands and related max radio-frequency power transmitted:
Frequency band (MHz)
Maximum power
EGSM900 890.0 - 914.8
Class 4 (2 W) @ 900 MHz, GSM
EGSM900 880.2 - 889.8
Class 1 (1 W) @ 1800 MHz, GSM
© 2018 Tyco Security Products. AllRights Reserved.Tech Support:1-800-387-3630 (Canada & U.S.) or 905-760-3000 www.dsc.com
The trademarks,logos,andservice marks displayedon this document are registeredin the United States and/or other countries.Any misuse of the trademarks is strictly prohibitedand Tyco willaggressively enforce its intellectualproperty rights to the fullest extent of the law,including pursuit of criminalprosecution wherever necessary.All trademarks not ownedby Tyco are the
property of their respective owners, andare used with permission or allowedunder applicable laws. Product offerings and specifications are subject to change without notice. Actualproducts may vary from photos. Not allproducts include allfeatures.Availability varies by region; contact your sales representative
