TE730 Series Temperature Sensors Installation Instructions
1
Applications
The TE730 Series Temperature Sensors provide
temperature sensing in room wall-mount applications.
This arrangement allows local temperature setpoint
adjustment and temporary occupancy override.
A setpoint dial is included on all models to adjust the
temperature setpoint. A manual occupancy override
push button is available on one model to allow the user
to request a time-of-day scheduling override, when the
space is occupied outside of the normal occupied
hours schedule.
The wires connecting the temperature sensor to the
controller are terminated with a modular jack
connection. All models include a Sensor Actuator (SA)
Bus access port (6-pin modular jack) for connecting
accessories. This feature allows a technician to
commission or service the controller via the
temperature sensor.
Installation
Special Tools Needed
A 1.5 mm (1/16 in.) Allen wrench or a
Johnson Controls® T-4000-119 Allen-Head Adjustment
Tool is required during installation.
Accessories
The TE730 Series Temperature Sensor can be
adapted to mount onto a standard wallbox using
accessory NS-WALLPLATE-0, ordered separately.
IMPORTANT:
The TE730 Series Temperature
Sensors are intended to provide an input to
equipment under normal operating conditions.
Where failure or malfunction of the temperature
sensor could lead to personal injury or property
damage to the controlled equipment or other
property, additional precautions must be designed
into the control system. Incorporate and maintain
other devices, such as supervisory or alarm systems
or safety or limit controls, intended to warn of or
protect against failure or malfunction of the
temperature sensor.
IMPORTANT :
Le TE730 Series Temperature
Sensors est destiné à transmettre des données
entrantes à un équipement dans des conditions
normales de fonctionnement. Lorsqu'une défaillance
ou un dysfonctionnement du temperature sensor
risque de provoquer des blessures ou
d'endommager l'équipement contrôlé ou un autre
équipement, la conception du système de contrôle
doit intégrer des dispositifs de protection
supplémentaires. Veiller dans ce cas à intégrer de
façon permanente d'autres dispositifs, tels que des
systèmes de supervision ou d'alarme, ou des
dispositifs de sécurité ou de limitation, ayant une
fonction d'avertissement ou de protection en cas de
défaillance ou de dysfonctionnement du
temperature sensor.
TE730 Series Temperature Sensors
Installation Instructions
TE730-29C-0
TE730-39C-0
Part No. 24-10674-0, Rev. C
Issued March 2016
24- 10674- 0, Rev . C
