Johnson Controls NEO Series Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 59

Johnson Controls NEO Series Скачать руководство пользователя страница 28

User Manual: NEO System

28

Rev.0.3

3.4 Disarming

The equipment / system provides features to disarm or disable voice alarm zones that will not

be used. Once disabled, these will be displayed in the menus, as described in section (2.2.7e).

It is not possible to perform any operation on a disabled zone. The information provided for the

states of emergency or failure will not be displayed.

3.4.1 Deactivating/Activating A Zone

To access the deactivation menu, press the shortcut button "DIS". From the disabling menu

press the "DISARMED STATE" option, the display will show an access control for level 2 users

(see 2.3). To return, press the “BACK" button. Upon successful completion of the access

control, all zones will be displayed, make the selection or deselection of the zones to

disable/enable, and click "OK" to confirm.

When the deactivation occurs in a zone, the corresponding amplifier channels to that zone

indicate the disarmed state in the led indicators. (see 2.1.2).

3.4.2 Disarm Log

The system has a log of disarmed zones which displays the operations that have been made

during the last hour in the disarmed state. A whole year's log will be accessible through the

configuration application.

In order to view the log, press the "DIS” button, and then “DISARMED LOG”. A list will

chronologically show the operations and indications that have been made. To exit the disarmed

log, press the button “BACK”.

To view all the logs, use the scroll up and down button to move around the window. A

description of all the logs will be available at Appendix B.

3.5 PA Mode

The NEO system, besides acting as a voice evacuation system, can function as a high-

performance public address system, when a voice evacuation is not required.

To access the Paging menu, proceed as follows:

Press the shortcut button, "PA", the access control for users with level 2 will appear (see 2.3).

To return, press the "BACK" button. Upon successful completion of the access control, the level

of access authorization, will change to "Level 2" and access the menu, which contains the

options: Zone volume setting, routing of audio sources and advanced.

«
...
26
27
28
29
30
...
»

Содержание NEO Series




























































Отзывы:

Нет отзывов