The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2013 Johnson Controls, Inc.
www.johnsoncontrols.com
3
M9102-AGA-2S, -3S and M9104-xGA-2S, -3S Series Electric Non-Spring Return
Actuators (Continued)
Technical Specifications
M9102-AGA-2S, -3S and M9104-xGA-2S, -3S Series Electric Non-Spring Return Actuators
Power Requirements
M910x-AGA-xS
AC 24 V
25%/-20% at 50/60 Hz, 2.1 VA Supply, Class 2, Safety Extra-Low Voltage (SELV)
M9104-IGA-xS
AC 24 V
25%/-20% at 50/60 Hz, 3.0 VA Supply, Class 2, SELV
M9104-GGA-xS
AC 24 V
25%/-20% at 50/60 Hz, 3.6 VA Supply, Class 2, SELV
Control Type
M910x-AGA-xS
Floating Control without Timeout
M9104-IGA-xS
Floating or On/Off Control with Timeout
M9104-GGA-xS
Proportional Control
Input Signal
M910x-AGA-xS
AC 24 V
25%/-20% at 50/60 Hz, Class 2, SELV without Timeout
M9104-IGA-xS
AC 24 V
25%/-20% at 50/60 Hz, Class 2, SELV with Timeout
M9104-GGA-xS
0(2) to 10 VDC or 0(4) to 20 mA with field-furnished 500 ohm resistor
Feedback Signal
M9104-GGA-2S
0 to 10 VDC or 2 to 10 VDC for 90° (10 VDC at 1 mA)
Corresponds to input signal span selection
Motor Input Impedance
200 ohms Nominal
Running Torque
M9102 Series
18 lb·in (2 N·m)
M9104 Series
35 lb·in (4 N·m)
Travel Time
M9102 Series
30 Seconds at 60 Hz (36 Seconds at 50 Hz) for 90°
of Rotation
M9104 Series
60 Seconds at 60 Hz (72 Seconds at 50 Hz) for 90° of Rotation
Rotation Range
93°
3°, CW or CCW
Cycles
100,000 Full Stroke Cycles;
2,500,000 Repositions at Rated Running Torque
Audible Noise Rating
35 dBA Nominal at 39-13/32 in. (1 m)
Electrical Connections
M9102-AGA-2S
M9104-xGA-2S
48 in. (1.2 m) UL 444 Type CMP Plenum Rated Cable with 19 AWG (0.75 mm
2
) conductors and
1/4 in. (6 mm) ferrule ends
M9102-AGA-3S,
M9104-xGA-3S
M3 Screw Terminals
Mechanical Connections
Up to 1/2 in. (13 mm) Diameter Round Damper Shaft or 3/8 in. (10 mm) Square Damper Shaft
Enclosure
M9102-AGA-2S,
M9104-xGA-2S
NEMA 2, IP42
M9102-AGA-3S,
M9104-xGA-3S
NEMA 1, IP40
Ambient Conditions
Operating
-4 to 140°F (-20 to 60°C); 90% RH Maximum, noncondensing
Storage
-20 to 150°F (-29 to 66°C); 90% RH Maximum, noncondensing
Compliance
United States
UL Listed, File E27734, CCN XAPX (United States) and XAPX7 (Canada)
Actuator Housing is Plenum Rated per CSA C22.2 No. 236/UL 1995, Heating and Cooling Equipment
Europe
CE Mark - Johnson Controls, Inc., declares that this product is in compliance with the essential requirements
and other relevant provisions of the EMC Directive 2004/108/EC.
Australia and New
Zealand
C-Tick Mark Australia/NZ Emissions Compliant
Shipping Weight
1.0 lb (0.5 kg)