Johnson Controls LP-FXVMA Series Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 8

Johnson Controls LP-FXVMA Series Скачать руководство пользователя страница 1

FXVMA Installation Instructions

1

Applications

This document covers the mounting and wiring of the
FXVMA Variable Air Volume (VAV) Box Controller. For
more information about programming, configuring,
downloading, and/or commissioning the FXVMA, refer
to the

FXVMA VAV Box Controller Technical Bulletin

(LIT-12011249).

The FXVMA is a VAV box controller in the Facility
Explorer line of products. The FXVMA is an integrated
assembly consisting of a high performance digital
controller, fast response actuator, and an accurate
Differential Pressure Transducer (DPT), all of which are
pre-wired together and integrated inside a single
enclosure.

The FXVMA is fully programmable using FX Builder, or
you can select and configure a pre-defined VAV box
control application using FX Builder Express.

Various software and accessories are available to
assist you during the commissioning of the FXVMA and
the VAV box. This includes FX CommPro, which has
computer-based downloading and commissioning
capabilities; and the Medium User Interface, which has
an easy-to-use hardware interface.

The FXVMA includes an embedded communication
capability that enables the FXVMA to integrate into an
N2 or BACnet® Master-Slave/Token-Passing (MS/TP)
(depending on model) network of a building automation
system.

North American Emissions Compliance

United States

Canada

Figure 1: FXVMA VAV Box Controller

This equipment has been tested and found to
comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when this equipment is
operated in a commercial environment. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference, in which case
the user will be required to correct the interference
at his/her own expense.

This Class (A) digital apparatus meets all the
requirements of the Canadian Interference-Causing
Equipment Regulations.

Cet appareil numérique de la Classe (A) respecte
toutes les exigences du Règlement sur le matériel
brouilleur du Canada.

FXVMA

Installation Instructions

LP-FXVMAxx-x

Part No. 24-10143-47, Rev. D

Issued April 16, 2009

Supersedes February 4, 2008

1
2
3
...
»

Содержание LP-FXVMA Series









Отзывы:

Нет отзывов