Table 2: Camera interior buttons / connections descriptions
Buttons /
Connectors
Description
PoE Ethernet port
AC24V Power connector
Reboots the camera (Press for 1 second)
Reset to factory default (Hold for 5 seconds and then
release)
AUDIO
ALARM
DI/DO (Digital Input/Output) ports are equipped for external
devices, e.g., smoke detector, siren, microphone.
Alarm In
: Via “GND” and “Alarm In” ports, connect to
external device that can trigger alarm input signals.
Alarm Out
: Via “COM” and “Alarm Out” ports, connect to
external device to be triggered through alarm output signals.
Audio In
: Via “GND” and “Audio In” ports, connect to
external device such as microphone that receives sound for
camera.
Audio Out
: Via “GND” and “Audio Out” ports, connect to
device such as speaker to be triggered through alarm
output signals.
Micro USB port
Security
Q
uick
S
tart
G
uide
(8200-2088-01_A)
Illustra Pro Gen4 20MP &32MP Outdoor Multisensor Dome camera
(P/N IPR20-M12-OI04 & IPR32-M13-OI04)
In the box
•
1 x Camera
•
2 x Rubber grommets
•
4 x Plastic screw anchors
•
1 x T20 Torx Wrench
•
4 x TP4 Self-tapping screws
•
1 x Side Cover
•
1 x RJ45 Insert Tool
•
2 x T20 Screw for side cover
•
1 x Mounting Template
•
1 x 12-pin Terminal connector for I/O function
•
1 x 2-pin Terminal block
•
1 x Printed Quick Start Guide
•
1 x Printed Regulatory Document
Installation tools
•
1 x T20 Torx wrench
•
1 x Drill
•
1 x Wire cutters
Figure 1: PG4 Multisensor Dome camera parts
Figure 1
Table 1: PG4 Multisensor Dome camera parts descriptions
Number
Description
1
Camera Top Cover with Bubble
2
Camera Lens Module
3
Mount Plate
Quick reference
•
Default IP: 192.168.1.168 (DHCP enabled)
•
Default Username / Password: admin / admin
•
Power: PoE BT Class8 (71.3W / 0.96A) or 24V AC (81W / 3.54A)
Figure 2a: Camera interior buttons / connections
Figure 2a
Figure 2b: Camera interior buttons / connections
Figure 2b
Inserting or removing the SD card
1.
Disassemble the camera as per steps 1 to 2 in
‘Disassembling the
camera’
procedure and carefully insert or remove the micro-SD card
(Figure 3) into or from the camera.
Note
: It is advised that you reboot the camera after inserting the micro-SD
card.
Figure 3
