Attaching the camera to a pendant cap (continued)
6. Continue at step 5 to 17 in the
‘Mounting the Camera to a surface’
procedure.
Security
Attaching the camera to a wall mount
You can attach the camera to a wall using one of the following wall mount
accessories IPSMDWALL3 or ADCiM6WALLWK.
1.
Insert the four standoffs (3) (Figure 11) that come in the box with the camera
up into the four holes (2) (Figure 11) in the wall mount (1) (Figure 11).
Figure 11
2.
Insert the flat bracket (2) (Figure 12) up into the wall mount and align the
four holes on the flat bracket (1) (Figure 12) with the four holes on the four
standoffs.
3.
Insert the four screws (3) (Figure 12) into the four holes and use a
screwdriver to securely attach the flat bracket to the wall mount.
Attaching the camera to a wall mount (continued)
Figure 12
4.
Continue at step 5 to 17 in the
‘Mounting the Camera to a surface’
procedure.
Attaching the camera to a pendant cap
You can attach the camera to the following Pendant Cap accessory
(ADCi6DPCAPOW).
1.
Hold the adaptor plate (2) (Figure 13) that comes in the box with the camera
up into the pendant cap (1) (Figure 13).
Attaching the camera to a pendant cap (continued)
Figure 13
2.
Align the two holes on the adaptor plate with the two holes on the pendant
cap.
3.
Insert the two screws (3) (Figure 13) into the two holes and use a
screwdriver to securely attach the adaptor plate to the pendant cap.
4.
Hold the flat bracket (2) (Figure 14) up to the adaptor plate (1) (Figure 14)
and align the four holes on the flat bracket with the four holes on the
adaptor plate.
Attaching the camera to a pendant cap (continued)
Figure 14
5.
Insert the four screws (3) (Figure 14) into the two holes and use a screwdriver
to securely attach the flat bracket to the adaptor plate.
© 2022 Johnson Controls. All rights reserved. JOHNSON CONTROLS, TYCO and
ILLUSTRA are trademarks and/or registered trademarks. Unauthorized use is
strictly prohibited.
